However, just generally discussing reliable companies that make solid products, I'd say:
Tygershark (cages)
Sick Innovations (cages, subcages, clipons)
Vortex, Driven (clipons, gas caps)
Motoheaven (chains, sprockets)
RSC (clutches)
Fullthrottle Inc (handbrakes)
all provide great customer service and solid products, and between them all you should be able to outfit an entire bike.
LetsStuntThe405 August 24, 2012
Hey thanks guys!!! That new fall 2012 icon gear is lookin nice as well, what are your opinions on safety gear?
LetsStuntThe405 August 24, 2012
Rsc makes a subcage but i cant find it on the website?
LetsStuntThe405 August 28, 2012
With tygershark should I get the apex or cj3 on 636, what's the pros and cons of either?
anthony.pesch August 29, 2012
I've always ran the Apex 2 bar design.
It's just as strong and a bit cheaper.
LetsStuntThe405 August 29, 2012
Hello? Anyone to answer my tygershark question?
kapzanass1 August 29, 2012
would man dont know much about it.... i see you though lol
LetsStuntThe405 August 30, 2012
Thanks Anthony! Is there any real difference in the cages?
anthony.pesch August 31, 2012
Not really man. The 2 bar cage has thicker bars, the 3 bar cage has a little thinner bars, but 3 of them.
Bruce will tell you they're both equally as strong, I think it's more of a cosmetic thing.
LetsStuntThe405 August 31, 2012
Thanks bro that's really more what I was questioning!
kav360 September 30, 2012
Is it handy enuf to find stunt parts for a 00-01 zx6r?
LetsStuntThe405 September 30, 2012
Do u ride that bike or are you looking to pick one up?
kav360 October 1, 2012
I was looking to get it only if i can get stunt parts on it. when i was looking at stunt parts seems you can only get it for a 03 and up. anywhere i can get parts for a 00 or a 01 model?
LetsStuntThe405 October 1, 2012
Anyone feel free to correct me or chime in here, as I only have so much to say.
It would most definitely be in your benefit to look for an 03/04 in your price range, fuel injection is where its at bro
kav360 October 2, 2012
ok cool will do thanks.
chris.salmond October 3, 2012
Couldnt find ANYONE that would build a cage for my bike
cb400 - maybe an odd choice for a stunter??
anyhow, so i grabbed some old bmx pegs i had, and some round tube from the hardware store, measured up things and should hopefully get some time to weld all together this weekend!!
the sick innovations sub cage/pegs fit well on though i can use most things, just needs a little altering to fit.
dwayneodh October 3, 2012
So i want to get new clip ons , the old FI i have on now are to low.. Not that i can jump threw yet but still want some higher.. since i dont jump threw i think db bars would be over kill? Any suggestions for my F4i?. thanks
vollrath October 3, 2012
I stunted an 01 zx6r. Sick innovations makes a cage for it, and i got the sprocket from motoheaven.
LetsStuntThe405 October 4, 2012
To the clip on guy...
I'm pretty sure sick innovations makes fully adjustable clip ons that can raise up about 3.5 inches. Also 7 degree sweep if u flip em would be even higher...... please any person correct me or chime in.......
LetsStuntThe405 October 4, 2012
That would also keep you open for when u do learn to jump through
sick innovations, RSC, brembo, sick innovations, vortex, omr
It really depends on the bike..
However, just generally discussing reliable companies that make solid products, I'd say:
Tygershark (cages)
Sick Innovations (cages, subcages, clipons)
Vortex, Driven (clipons, gas caps)
Motoheaven (chains, sprockets)
RSC (clutches)
Fullthrottle Inc (handbrakes)
all provide great customer service and solid products, and between them all you should be able to outfit an entire bike.
Hey thanks guys!!! That new fall 2012 icon gear is lookin nice as well, what are your opinions on safety gear?
Rsc makes a subcage but i cant find it on the website?
With tygershark should I get the apex or cj3 on 636, what's the pros and cons of either?
I've always ran the Apex 2 bar design.
It's just as strong and a bit cheaper.
Hello? Anyone to answer my tygershark question?
would man dont know much about it.... i see you though lol
Thanks Anthony! Is there any real difference in the cages?
Not really man. The 2 bar cage has thicker bars, the 3 bar cage has a little thinner bars, but 3 of them.
Bruce will tell you they're both equally as strong, I think it's more of a cosmetic thing.
Thanks bro that's really more what I was questioning!
Is it handy enuf to find stunt parts for a 00-01 zx6r?
Do u ride that bike or are you looking to pick one up?
I was looking to get it only if i can get stunt parts on it. when i was looking at stunt parts seems you can only get it for a 03 and up. anywhere i can get parts for a 00 or a 01 model?
Anyone feel free to correct me or chime in here, as I only have so much to say.
It would most definitely be in your benefit to look for an 03/04 in your price range, fuel injection is where its at bro
ok cool will do thanks.
Couldnt find ANYONE that would build a cage for my bike
i can use most things, just needs a little altering to fit.
cb400 - maybe an odd choice for a stunter??
anyhow, so i grabbed some old bmx pegs i had, and some round tube from the hardware store, measured up things and should hopefully get some time to weld all together this weekend!!
the sick innovations sub cage/pegs fit well on though
So i want to get new clip ons , the old FI i have on now are to low.. Not that i can jump threw yet but still want some higher.. since i dont jump threw i think db bars would be over kill? Any suggestions for my F4i?. thanks
I stunted an 01 zx6r. Sick innovations makes a cage for it, and i got the sprocket from motoheaven.
To the clip on guy...
I'm pretty sure sick innovations makes fully adjustable clip ons that can raise up about 3.5 inches. Also 7 degree sweep if u flip em would be even higher...... please any person correct me or chime in.......
That would also keep you open for when u do learn to jump through
thanks ;)